Kolink Stronghold Midi Tower Black
- Case designed for motherboards up to E-ATX
- Side panel in 4 mm thick tempered glass
- Plastic brushed aluminium-look front
- 2x pre-installed 120 mm fans, 6 total possible
- I/O Panel with 2x USB 2.0 / 1x USB 3.0 &
- HD Audio In/Out
- Support for two 240 mm radiators
- 3x 3.5/2.5″ drive slots
- Graphics cards up to 38 cm long & CPU coolers up to 16 cm height
Kolink is pleased to introduce the incredibly stylish Stronghold Midi-Tower with its fantastic tempered glass side panel and black front panel. The capacious interior of the Stronghold allows for plenty of space for high-end hardware. Pre-installed dust filters, plenty of space for water cooling and superb cable management options are just some of the highlights of this case stunning, yet competitively-priced, Kolink case.
Tempered Glass Side Panel & Two Pre-Installed Fans
The robust chassis consists of one millimetre thick SECC steel and is equipped with a four millimetre thick tempered glass side panel and a plastic front with a stylish brushed aluminium look. The entire interior is coated in black and equipped with a power supply shroud to achieve an incredibly clean aesthetic. A hard drive cage with brackets for three 3.5- or 2.5″ drives is also included.
In order to give the installed hardware the best possible airflow, the case comes with two of a total of six possible 120 mm fans with Molex connectors. One is placed at the lowest of three potential places behind the front, the second at the slot in the back. Two additional 120 mm fans can be installed under the top of the case.
Dust Filters Keep the Kolink Stronghold Clean
The motherboard tray and the power supply cover offer numerous openings for perfect cable management. A 240 mm radiator can be installed in the front and in the top of the Observatory’s chassis. The air inlets come with fine dust filters in the roof and base of the chassis. They can be removed without tools and are strengthened with the help of a filigree honeycomb pattern.
Graphics cards up to 38 cm are compatible along with CPU coolers up to 16 cm in height. Additionally the front of the case comes with an I/O panel including two USB 2.0 connectors and a USB 3.0 Type-A port. There is also a slot for a switch to control the RGB lighting, but this is not included in the housing and must be retrofitted separately.
| Design | |
|---|---|
| Maximum PSU length | 20 cm |
| Maximum graphics card length | 38 cm |
| Maximum CPU cooler height | 16 cm |
| RGB control button | Yes |
| On/off button | Yes |
| Reset button | Yes |
| Cable management | Yes |
| Anti-dust filter | Yes |
| Tempered glass panel(s) | Yes |
| Suitable for | Gaming |
| Side window | Yes |
| Number of expansion slots | 7 |
| Number of 3.5″ bays | 3 |
| Supported motherboard form factors | ATX, EATX, micro ATX, Mini-ITX |
| Product colour | Black |
| Material | Steel |
| Type | PC |
| Form factor | Midi Tower |
| Power supply | |
|---|---|
| Supported power supply form factors | ATX |
| Power supply included | No |
| Ports & interfaces | |
|---|---|
| Audio output | Yes |
| Audio input | Yes |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| USB 2.0 ports quantity | 2 |
| Cooling | |
|---|---|
| Top radiator sizes supported | 240 mm |
| Front radiator sizes supported | 280 mm |
| Top fans diameters supported | 120 mm |
| Number of top fans supported (max) | 1 |
| Rear fans diameters supported | 120 mm |
| Number of rear fans supported (max) | 1 |
| Rear fans installed | 1x 120 mm |
| Front fans diameters supported | 120 mm |
| Number of front fans supported (max) | 3 |
| Front fans installed | 1x 120 mm |
| Storage | |
|---|---|
| SSD form factor | 2.5″ |
| Supported HDD sizes | 3.5″ |
| Weight & dimensions | |
|---|---|
| Weight | 5.75 kg |
| Height | 435 mm |
| Depth | 435 mm |
| Width | 201 mm |
| Packaging data | |
|---|---|
| Package height | 490 mm |
| Package depth | 495 mm |
| Package width | 265 mm |
- leaflet
- manual pdf
